Sustainability News
  • Volvo Car Corporation participates in a project for the development of inductive charging for electric cars

    2011-05-19
    Inductive battery charging, (with explaining text)
    Inductive battery charging, (with explaining text)A charging plate is buried in the ground, for instance in the driveway at home where the car is parked. The charging plate consists of a coil that generates a magnetic field. When the car is parked above the plate, energy from the plate is transferred without contact to the car’s inductive pick-up. The energy that is transferred is alternating current and this is then converted into direct current in the car’s built-in voltage converter, which in turn charges the car’s battery pack. Charging a battery pack of the size fitted to the Volvo C30 Electric, 24 kWh, takes about an hour and twenty minutes, if the battery is entirely discharged. The charging system that is being tested is dimensioned for 20 kW.

    Volvo Car Corporation participates in a project for the development of inductive charging for electric cars

     

    Volvo Car Corporation is participating in an inductive charging project. Together with Belgian technological and development specialists Flanders' Drive and others, Volvo Car Corporation is developing systems and methods that need neither power sockets nor charging cables. With inductive charging, energy is transferred wirelessly to the car's battery via a charging plate buried in the road surface.

     

    "The aim is naturally that it should be as convenient as possible to own and use an electric car," explains Johan Konnberg, project manager from the Special Vehicles division of Volvo Car Corporation. A Volvo C30 Electric will be delivered to Flanders' Drive on May 19 to be modified for inductive charging. The handover also marks the formal starting signal for the project, which goes under the name of CED (Continuous Electric Drive). Other participants in addition to Volvo Car Corporation and Flanders' Drive, which is owned by the Belgian state, are bus manufacturer Van Hool and tram manufacturer Bombardier.

     

    Wireless energy transfer
    In inductive charging, a charging plate is buried in the ground, for instance in the driveway at home where the car is parked. The charging plate consists of a coil that generates a magnetic field. When the car is parked above the plate, energy from the plate is transferred without physical contact to the car's inductive pick-up. The energy that is transferred is alternating current. This is then converted into direct current in the car's built-in voltage converter, which in turn charges the car's battery pack. Charging a battery pack of the size fitted to the Volvo C30 Electric, 24 kWh, is expected to take about an hour and twenty minutes, if the battery is entirely discharged. The charging system to be evaluated is dimensioned for 20 kW.

     

    Development and knowledge acquisition
    Several car makers and technology companies are conducting research into this area but as yet there are no car manufacturers that can offer the market a finished product.
    "There is not yet any common standard for inductive charging," says Johan Konnberg.
    He emphasises the importance of being involved in development and learning about the technology in order to build up a solid bank of expertise in this area.


    "One aspect of this project is to integrate this technology into the road surface and to take energy directly from there to power the car. This is a smart solution that is some way into the future," concludes Johan Konnberg.

     

    The Volvo C30 Electric is part of Volvo Car Corporation' ambitious electrification strategy. It is as well-equipped, comfortable, sporty and safe as the standard car - while at the same time offering the driver a range of up to 150 kilometres per charge with zero carbon dioxide emissions.
    Deliveries of the initial batch of 250 cars to selected customers in Europe will begin during the second half of 2011.

    Volvo Car Corporation is participating in an inductive charging project. Together with Belgian technological and development specialists Flanders' Drive and others, Volvo Car Corporation is developing systems and methods that need neither power sockets nor charging cables. With inductive charging, energy is transferred wirelessly to the car's battery via a charging plate buried in the road surface.
    Back