Using a stored position for seat, door mirrors and head-up display*

If the positions for the power* seat, the door mirrors and the head-up display* have been stored, they can be activated simply by using the memory buttons.

Using a stored setting

P5-1617-S90 V90 Memory function front seat door

A stored setting can be used with the front door either open or closed:

Open front door

Depress one of the memory buttons 1 (P5-Icon red circle 2) or 2 (P5-Icon red circle 3) with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.

Closed front door

Hold one of the memory buttons 1 (P5-Icon red circle 2) or 2 (P5-Icon red circle 3) depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.

If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.

 Warning

  • Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • Make sure there is nothing under the seats when they are being adjusted.
  1. * Option/accessory.