Filling up with fuel

The fuel tank is fitted with a coverless fuel filler system. Filling is carried out as follows:
P4-1220-Fuel filling
  • Open the fuel filler flap. See also Fuel filler flap - manual opening.
  • Insert the pump nozzle in the fuel filler opening. Take care to insert the nozzle properly into the filler pipe. The filler pipe consists of two opening covers. The nozzle must be pushed past both covers before refuelling is started.
  • Do not overfill the tank but fill until the pump nozzle cuts out.

 Note

Excess fuel in the tank can overflow in hot weather.

 Note

Avoid spilling by waiting approximately 5-8 seconds before carefully removing the nozzle once refuelling is complete.