Charging cable with control unit

The charging cable with its control unit is used to charge the car's hybrid battery. Use a charging cable recommended by Volvo.

P3-1246-V60H-Förvaring laddkabel
The charging cable is located in the storage compartment under the cargo area's floor cover.
Specifications, charging cable
Enclosure classIP67
Ambient temperature-32 ºC to +50 ºC

 Warning

The charging cable must not be used if any part of it is damaged - there is then the risk of electric shock and serious personal injury.

A damaged or inoperative charging cable must only be repaired by a workshop - an authorised Volvo workshop is recommended.

 Important

Never unplug the charging cable from the 230 VAC socket while charging is in progress - there is then a risk of damaging the 230 VAC socket. Always stop charging first, and then disconnect the charging cable.

Control unit

P1-1324-C30E Kontrollenhet laddkabel
Control unit display and controls.
Ikon röd cirkel 1 Indicator1 shows selected charging current.
Ikon röd cirkel 2The symbol illuminates when the charging cable is plugged into a 230 VAC socket.
Ikon röd cirkel 3Pushbuttons to increase/decrease the charging current.
Ikon röd cirkel 4The symbol illuminates when the charging cable is plugged into the car's 230 VAC input socket.

 Important

Multiple plugs, overvoltage protection or similar devices must not be used together with the charging cable since this may involve a risk of fire, electric shocks, etc.

An adapter between the 230 VAC socket and charging cable may only be used if the adapter is marked with approval in accordance with IEC 61851 and IEC 62196.

 Note

The charging cable will remember the last setting of the charging current. It is therefore important to adjust the setting if another 230 VAC socket is used at the next charging.
  1. 1 Maximum charging current may vary depending on market.