Bulb replacement

Removing the plastic cover for bulb replacement

Updated 5/18/2020

Removing the plastic cover for bulb replacement

The bulb in the halogen headlamp can be replaced without the help of a workshop, but the plastic cover over the headlamp must be removed before a bulb can be replaced.

P5-1617-S90/V90 Seal carrier removal

Press down the pins into the plastic cover's four clips using a screwdriver or similar and lift away the cover.

Note

Points to remember when the cover is refitted:

  • The pin in the clip needs to be pressed back fully before the clip is refitted in the cover.
  • When the cover is refitted, the pin must be pressed in until the end surface is level with the surface of the clip.

Did this help?