The car also stores statistics of journeys made, which can be viewed in the form of a block diagram. See the section "Show trip statistics in the centre display".
The hybrid gauge shows in different ways the relationship between how much power is being taken from the electric motor and how much power is available.
Indicates current level for available electric motor power. If the symbol is filled in, it means that the electric motor is in use.
If the symbol is not filled in, it means that the electric motor is not in use.
Indicates the power level when the combustion engine starts. If the symbol is filled in, it means that the combustion engine is in use.
Indicates the power level when the internal combustion engine is due to start. If the symbol is not filled in, it means that the combustion engine is not in use.
Indicator that shows that the hybrid battery is being charged, e.g. if the brake pedal is gently depressed.
Information from trip computer: distance to empty battery, eDTE (Electrical Distance To Empty) indicator. Shows approximate distance with remaining energy quantity in the hybrid battery.
The symbol belongs to the hybrid battery gauge in the lower right-hand section of the instrument.
Available electric motor power
Hybrid battery gauge.
The upper right-hand section of the instrument contains a hybrid battery gauge. The gauge shows how much energy there is in the battery. This energy is used for the electric motor, but also to cool or heat the car.
The pointer in the hybrid gauge indicates the amount of engine power requested by the driver by regulating the accelerator pedal. The higher the reading on the scale, the more power is requested by the driver in the current gear. The marking between the lightning bolt and the drop indicates the transition point where the electric motor stops working and the combustion engine takes over.
The car is started but stationary, no power is requested.
The electric motor cannot supply the amount of engine power requested and the internal combustion engine starts.
The car generates current to the battery, the battery is charged, e.g. when the brake pedal is pressed lightly or during engine braking down a hill.
Functions "Hold" and "Charge"
The symbol in the hybrid battery gauge indicates that the Hold or Charge function is activated. For more information on these functions, see the section "Maintain or increase the hybrid battery's state of charge while driving".