Settings

Show trip data in the driver display

Обновления 7/10/2020

Show trip data in the driver display

The trip computer's recorded and calculated values can be shown in the driver display.

The values are saved in a trip computer app. Via the app menu, you can choose which information is shown on the driver display.

P5-1717-ALL-Trip computer navigation in driver display

Open and navigate in the app menuThe figure is schematic - parts may vary depending on car model. using the right-hand steering wheel keypad.

App menu
Left/right
Up/down
Confirm

Open the app menu in the driver display by pressing (1).

(It is not possible to open the app menu while there is an unacknowledged message in the driver display. The message first has to be confirmed by pressing the O button (4) before the app menu can be opened.)

Navigate to the trip computer app to left or right with (2).

The top four menu rows show measured values for trip meter TM. The next four menu rows show measured values for trip meter TA. Scroll up or down in the list with (3).

Scroll down to the option buttons to select which information to show in the driver display:

  • Odometer
  • Distance to empty tank
  • Distance to empty battery
  • Tourist (alternative speedometer)
  • Mileage for trip meter TM, TA, or no display of mileage
  • Instantaneous fuel consumption, average consumption for TM or TA, alternatively, no display of fuel consumption

Select or deselect an option with the O button (4). The change is made immediately.


Это помогло?