Прочитать руководство

V60 Twin Engine

9 Результаты

Drive mode for driver support

Обновления 1/31/2020

The driver can select different driving styles for how driver support should maintain the preset time interval to the vehicle ahead.

Hold and Charge function

Обновления 7/10/2020

In some situations, it can be useful to be able to control the hybrid battery's state of charge while driving is in progress. This is possible with the functions Hold and Charge.

Drive modes

Обновления 1/31/2020

Selection of drive mode affects the car's driving characteristics in order to enhance the driving experience and facilitate driving in special situations.

Changing drive mode*

Обновления 1/31/2020

Select the drive mode that best suits the current driving conditions.Change the drive mode using the control in the centre console.

Energy distribution in hybrid drive using map data*

Обновления 1/31/2020

The Hybrid drive mode is the car's normal mode where the electric motor and internal combustion engine work individually or together in hybrid drive. If a destination has been selected in the navigation system, the Predictive Efficiency function distributes the electric energy consumption in an intelligent way along the whole driving distance using the map data.

Level control* and shock absorption

Обновления 1/31/2020

Level control and shock absorption are regulated automatically in the car.

Settings for level control*

Обновления 1/31/2020

Switch off the level control when the car is to be jacked up in order to prevent problems with automatic regulation.

Driving with electric operation

Обновления 7/10/2020

When driving on electric power, Volvo Twin Engine provides a combination of good fuel economy, low emissions and high performance.

All-wheel drive*

Обновления 7/10/2020

All-wheel drive (AWD) means that the car is driving all four wheels at the same time, which improves traction.