Wiper blades and washer fluid

Wiper blades in service position

Обновления 7/23/2018

The windscreen wiper blades must be in service position (vertical position) when, for example, they are being replaced.

P5-1617-S90 V90-Service position wiper blades

Wiper blades in service position.

In order to change, clean or lift the wiper blades (e.g. for scraping off ice from the windscreen) they must be in service position.

Важно!

Before placing the wiper blades in the service position, make sure that they are not frozen down.

Activating/deactivating service mode

Service mode can be activated/deactivated when the car is stationary and the windscreen wipers are not on. Service mode is activated/deactivated via the function view in the centre display:

P5-1507-Serviceposition-button

Press the Wiper Service Position button. The light indicator in the button illuminates when the service position is activated. Upon activation, the wipers move to standing straight up. To deactivate the service mode, press Wiper Service Position again. The light indicator in the button extinguishes when the service position is deactivated.

The wiper blades also exit service position if:

  • Windscreen wiping is activated.
  • Windscreen washing is activated.
  • Rain sensor activated.
  • The car is driven away.

Важно!

If the wiper arms in service position have been folded up from the windscreen, they must be folded back down onto the windscreen before the activation of wiping, washing or the rain sensor, as well as before driving. This is to avoid scraping the paint on the bonnet.


Это помогло?