Refuelling with vehicle gas
Fill the vehicle gas in the gas nipple that is located behind the fuel filler flap.
Open the fuel filler flap and remove the gas nipple's protective cover.
Push the nozzle towards the gas nipple, make sure that the hose nozzle is attached by turning the handle on the nozzle a half turn.
Then hold the start button on the gas pump depressed for several seconds.
The tank is filled in a couple of minutes.
Remove the nozzle by turning its handle a half turn in the opposite direction.
Refit the gas nipple's protective cover and close the fuel filler flap.
Identifier for vehicle gas
The identifier in accordance with the CEN standard EN16942 is located on the inside of the fuel filler flap, and will be on corresponding fuel pumps and their nozzles at filling stations throughout Europe by the end of 2018 at the latest.
This is the identifier that applies for CNG in Europe. Vehicle gas with this identifier may be used in cars that can be driven on Bi-Fuel.
Filling stations for vehicle gas
Road sign for filling stations that offer vehicle gas.