To adjust max. opening:
Open the tailgate - stop it in the open position.
It is not possible to program an opening position lower than half-open tailgate.
Press the button on the underside of the tailgate for at least 3 seconds.
Two short acoustic signals sound to indicate that the set position has been saved.
To reset max. opening:
Manually move the tailgate to its highest possible position – press and hold the button on the tailgate for at least 3 seconds.
Two acoustic signals sound to indicate that the set position has been cleared. The tailgate will then assume its maximum position when opened.
- If the system has been operating continuously for a long time, it is switched off to avoid overload. It can be used again after about 2 minutes.