Exterior lighting

Dipped beam

Обновления 7/10/2020

Dipped beam

When driving with the stalk switch's rotating ring in the position, dipped beam is activated automatically in weak daylight or darkness or when the car's electrical system is in ignition position II.

P5-1617 Stalk with turning ring, low beam

Stalk switch rotating ring in AUTO position.

With the stalk switch's rotating ring in position, dipped beam is also activated automatically if the rear fog lamp is activated.

With the stalk switch's rotating ring in the position, dipped beam is always activated when the car's electrical system is in ignition position II.

Tunnel detection

The car detects when it is driven into a tunnel and switches from daytime running lights to dipped beam.

Note that the rotating ring in the left-hand stalk switch must be in mode for tunnel detection to work.


Это помогло?