Starting and switching off the car

Selecting ignition mode

Обновления 7/10/2020

Selecting ignition mode

The car's electrical system can be set in different levels/positions and in this way make the different functions available.

Selecting ignition position

P5-OM-ALL-Start/stop switch

Start knob in the tunnel console.

  • Ignition position 0 – Unlock the car and store the remote control key inside the car.

Примечание

To reach level I or II without starting the engine - do not depress the brake pedal, or the clutch pedal for cars with manual gear changing, when these ignition positions are to be selected.

  • Ignition position I – Turn the start knob clockwise and release it. The control automatically returns to its starting position.
  • Ignition position II – Turn the start knob clockwise and hold it in position for approx. 5 seconds. Then release the knob, which automatically returns to its starting position.
  • Back to ignition position 0 – To return to ignition position 0 from position I and II – Turn the start knob clockwise and release. The control automatically returns to its starting position.

Это помогло?