Driver support
Speed Limit Warning alerts the driver when the speed limit in force or the set "speed limit" is exceeded - after the warning has been repeated one extra time if the driver does not reduce speed.
The speed warning is given by the driver display symbolRoad signs are market-dependent - the illustration in these instructions only show one example. showing the applicable maximum permitted speed temporarily flashing when this speed is exceeded.
A speed warning is always given if the speed limit is exceeded in connection with speed camera information.
Settings
Adjust the limit for Speed Warning
The driver can select to receive a warning at a higher speed than the signed speed.
Select limit for speed warning as follows:
Select in the centre display's top view.
Select Speed Limit Warning.
The function is activated and a speed limit selector appears.
Adjust the limit for Speed Warning by pressing the up/down arrows on the screen.
Note that the function does not give any consideration to selected limit adjustment when the driver display shows the speed camera symbol.
Acoustic warning On/Off
It is also possible to receive an acoustic warning in connection with Speed Warning.
Change setting for acoustic warning as follows:
Select in the centre display's top view.
Select/deselect Road Sign Audio Warning to activate/switch off the acoustic warning.
With the Road Sign Audio Warning function activated, the driver is also warned when driving towards one-way traffic/no-entry entrance.
