Brakes

Activating and deactivating the automatic brake at a standstill

Обновления 7/9/2020

Activating and deactivating the automatic brake at a standstill

The automatic brake function at a standstill is activated using the button in the tunnel console.

P5-1717-ALL-Auto hold button

Press the button in the tunnel console to activate or deactivate the function.

The indicator in the button illuminates when the function is activated. Activated function remains even when the car is started next time.

Applicable when switching off

P5-1507 Symbol Auto hold

If the function is active and holds the car with the foot brake (A-symbol illuminated) then the brake pedal must be depressed at the same time as the button is depressed in order to deactivate.

  • The function remains deactivated until it is reactivated.
  • When the function is deactivated, hill start assist (HSA) remains active to prevent the car from rolling backwards when starting on an uphill gradient.

Это помогло?