Прочитать руководство

XC90 Twin Engine

Specifications for fluids and lubricants

8 Результаты

Adverse driving conditions for engine oil

Обновления 7/9/2020

Adverse driving conditions can lead to abnormally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.

Coolant — specifications

Обновления 7/23/2018

Prescribed grade: Coolant recommended by Volvo mixed with 50% water, see the packaging. Consult a Volvo retailer if unsure.To avoid health risks, different types of glycol must not be mixed.

Brake fluid — specifications

Обновления 7/23/2018

The medium in a hydraulic brake system is called brake fluid, and it is used to transfer pressure from e.g. a brake pedal via a master brake cylinder to one or more slave cylinders, which in turn act on a mechanical brake.

Transmission fluid — specifications

Обновления 7/23/2018

Under normal driving conditions, the transmission fluid does not need to be changed during its service life. However, it may be necessary in adverse driving conditions.

Engine oil — specifications

Обновления 7/23/2018

Engine oil grade and volume for each respective engine alternative can be read in the table.

Air conditioning — specifications

Обновления 7/23/2018

The car's climate control system uses a freon-free refrigerant, either R1234yf or R134a depending on market. Information about which refrigerant the car's climate control system uses is printed on a decal located on the inside of the bonnet.

Filling washer fluid

Обновления 7/23/2018

Washer fluid is used for cleaning the headlamps as well as the windscreen and rear window. Washer fluid with antifreeze must be used when the temperature is under the freezing point.

Fuel tank - volume

Обновления 7/23/2018

The fuel tank's filling capacity can be read in the table below.