Maintenance

New procedures for replacing the rear wiper blade

Обновления 1/21/2020

New procedures for replacing the rear wiper blade

If your car has been in for service and a service technician has replaced the wiper arm for the rear wiper blade, the procedure for replacing the wiper is different.

Replacing the rear wiper blade

If the wiper arm has been replaced by a service technician in connection with service, follow the steps below to replace the wiper blade on the rear windowApplies to the V60, V60CC and V60H manufactured before 15w26 where the wiper arm is replaced in connection with service..

16w26 - Support site - P3/P4 - Back Windshield Wiper

Press with a thumb at the arrow to loosen the blade.

Fold the wiper arm outwards.

Angle the wiper blade slightly out from the wiper arm.

Grip around the wiper arm and using a thumb, press the blade forward (at the arrow) to loosen and remove the blade.

Press the new wiper blade into place. Check that it is firmly attached.

Fold the wiper arm back down.

Car model/model year

V60 to and including model year 2016Applies to cars in which the wiper arm is replaced in connection with service..

The range of models, systems and services may vary depending on market.

For car models from and including model year 2020, see on-line manual for the model concerned.


Эта статья предназначена для:

Car model/model year

V60 to and including model year 2016.

The range of models, systems and services may vary depending on market.

For car models from and including model year 2020, see on-line manual for the model concerned.


Это помогло?