Dipped beam

When driving with the stalk switch's rotating ring in the P5-1707 Symbol AUTO position, dipped beam is activated automatically in weak daylight or darkness.
P5-1617 Stalk with turning ring, low beam
Stalk switch rotating ring in AUTO position.

With the stalk switch's rotating ring in the P5-1707 Symbol AUTO position, dipped beam is activated automatically in weak daylight or darkness, when the car's electrical system is in ignition position II or when the car is running.

With the stalk switch's rotating ring in P5-1707 Symbol AUTO position, dipped beam is also activated automatically if:

  • the front fog lamps* are activated
  • the rear fog lamp is activated
  • the front and rear fog lamps are activated

Dipped beam is always switched on when the rotating ring on the stalk switch is in position P5-1507 Symbol low beam when the car's electrical system is in ignition position II or when the car is running.

Tunnel detection

The car detects when it is driven into a tunnel and switches from daytime running lights to dipped beam.

Note that the rotating ring in the left-hand stalk switch must be in P5-1707 Symbol AUTO mode for tunnel detection to work.

  1. * Option/accessory.