Set cruise control in standby mode
To set cruise control in standby mode:
Press ◀ (1) or ▶ (3) to browse to the symbol/function (4).
The symbol is shown and the cruise control can then be activated.
Activating/starting cruise control
In order to start the cruise control from the standby mode, the car's current speed must be 30 km/h (20 mph) or higher. The lowest speed that can be stored is 30 km/h (20 mph).
To start the cruise control:
With the symbol/function displayed, press the steering wheel button (2).
Cruise Control starts and the current speed becomes the stored speed.
Cruise Control cannot be enabled at speeds below 30 km/h (20 mph).