Using a stored position for seat, door mirrors and head-up display*

If the positions for the power* seat, the door mirrors and the head-up display* have been stored, they can be activated by using the memory buttons.

Using a stored setting

P5-1617-S90 V90 Memory function front seat door

A stored setting can be used with the front door either open or closed:

Open front door

Depress one of the memory buttons 1 (P5-Icon red circle 2) or 2 (P5-Icon red circle 3) with a short press. Power seat, door mirrors and head-up display move and then stop at the positions stored in the selected memory button.

Closed front door

Hold one of the memory buttons 1 (P5-Icon red circle 2) or 2 (P5-Icon red circle 3) depressed until seat, door mirrors and head-up display stop in the positions that are stored in the selected memory button.

If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.

 Warning

  • Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • Make sure there is nothing under the seats when they are being adjusted.

 Note

All driver profiles need to be set in Protect Profile mode in order for the stored positions to work.
  1. * Option/accessory.