Setting/changing the stored speed
NOTE: The illustration is schematic - details may vary depending on car model and market.
|: Increases the stored speed|
|: Reduces stored speed|
Change a set speed with short presses on the steering wheel buttons (1) or (2) or by pressing and holding them.
- Short presses: Each press changes the speed in increments of +/- 5 km/h (+/- 5 mph).
- Press and hold: Release the button when the speed indicator (3) has moved to the desired speed.
- The speed set after the last button press is stored in the memory.
If the driver increases the car's speed using the accelerator pedal before pressing the steering wheel button (1), the speed stored will be the car's speed when the button is depressed, provided the driver's foot is on the accelerator pedal at the moment when the button is depressed.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.
Pilot Assist can follow another vehicle at speeds from 0 km/h up to 200 km/h (125 mph).
Note that the lowest programmable speed for Pilot Assist is 30 km/h (20 mph) - even though it is capable of following another vehicle down to 0 km/h, a speed lower than 30 km/h (20 mph) cannot be selected/stored.
The maximum speed selectable is 200 km/h (125 mph).
Pilot Assist can follow another vehicle at speeds from 30 km/h (20 mph) up to 200 km/h (125 mph).
The lowest programmable speed for Pilot Assist is 30 km/h (20 mph) - the maximum speed is 200 km/h (125 mph).