2020
Explore your manual
XC40 Twin Engine
2020
Specifications for fluids and lubricants
8 Results
Filling washer fluid
Washer fluid is used for cleaning the headlamps as well as the windscreen and rear window. Washer fluid with antifreeze must be used when the temperature is under the freezing point.
Air conditioning – specifications
The car's climate control system uses a freon-free refrigerant either R1234yf or R134a depending on market. Information about which refrigerant the car's climate control system uses is printed on a decal located on the inside of the bonnet.
Brake fluid – specifications
Brake fluid is the medium in a hydraulic brake system that is used to transfer pressure from e.g. a brake pedal via a master brake cylinder, which in turn acts on the brake callipers.
Transmission fluid – specifications
The transmission fluid needs to be replaced every 60,000 km.
Fuel tank - volume
The fuel tank's filling capacity can be read in the table below.
Coolant – specifications
Prescribed grade: Ready-mixed coolant approved by Volvo. If concentrated coolant is used, mix with 50% water (of approved water quality, not salt water, etc.). Consult a Volvo dealer if unsure.
Adverse driving conditions for engine oil
Adverse driving conditions can lead to abnormally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.
Engine oil – specifications
Engine oil grade and volume for each respective engine alternative can be read in the table.