The driver display contains gauges, indicators and indicator and warning symbols. The content of the driver display depends on the car's equipment, settings and which functions are active at that time.
The driver display is activated as soon as a door is opened, i.e. in ignition position 0. The driver display extinguishes after a while if it is not used. To reactivate it, proceed with one of the following:
- Depress the brake pedal.
- Activate ignition position I.
- Open one of the doors.
If the driver display should extinguish, not illuminate on activation/start or be fully or partially illegible, the car must not be used. You should visit a workshop immediately. Volvo recommends an authorised Volvo workshop.
In the event of a fault in the driver display the information on e.g. brakes, airbags or other safety systems may not be shown. In which case, the driver cannot check the status of the car's systems or receive current warnings and information.
The figure is schematic - parts may vary depending on car model.
On the left
In the middle
On the right
Indicator and warning symbols
Tachometer/Hybrid gaugeDepends on drive mode selected.
Outside temperature gauge
Gear shift indicator
Cruise control and speed limiter information
Messages, in some cases with graphics
Road Sign Information*
Door and seatbelt information
Hybrid battery gauge
Distance to empty tank
Distance to empty battery
Instantaneous fuel consumption
App menu (activated via steering wheel keypad)
CompassDepends on drive mode selected.
The dynamic symbol in its basic form.
The centre of the driver display contains a dynamic symbol that changes appearance for different types of message. An amber or red marker around the symbol indicates the degree of severity of a control or warning message.
Examples of indicator symbol.
With an animation, the basic shape can be turned into a graphic showing where a problem is situated, or in order to clarify information.
The symbol in the driver display changes shape.