Instruments and controls

Parking brake

Updated 1/14/2020

The parking brake prevents the car from rolling away from stationary by means of mechanically locking/blocking two wheels.

P5-1507-Parking brake

The control for the parking brake is located in the tunnel console between the seats.

A faint electric motor noise can be heard when the electrically-operated parking brake is being applied. The noise can also be heard during the automatic function checking of the parking brake.

If the car is stationary when the parking brake is applied then it only acts on the rear wheels. If it is applied when the car is moving then the normal foot brake is used, i.e. the brake acts on all four wheels. Brake function changes over to the rear wheels when the car is almost stationary.


Did this help?