Opening/closing the panoramic roof
How to operate the panoramic roof in your car is described below.
If the car is switched off, turn the start knob to START and release the knob.
You can find the button for controlling the panoramic roof above the interior rearview mirror.
Open the panoramic roof to ventilation position
Press the button upward once to open the panoramic roof to the ventilation position.
Close the panoramic roof from ventilation position
Press the button downward once to close the panoramic roof from the ventilation position.
Open the panoramic roof fully
Take hold of the button and pull it backward twice to fully open the panoramic roof.
Close the panoramic roof from fully open position
Press the button downward twice to close the panoramic roof from the fully open position.
Children, other passengers or objects can be trapped by the panoramic roof's moving parts.
Always operate the panoramic roof with caution.
Do not allow children to play with the operating control.
Remember to always cut the current to the panoramic roof by setting the vehicle's electrical system to ignition mode 0 and then taking the key with you when leaving the vehicle.
Do not open the panoramic roof when load carriers are installed.
Remove ice and snow before opening the panoramic roof. Be careful not to scratch any surfaces or damage the trim.
It may not be possible to operate the windows in low temperatures.
For more information about how to operate the panoramic roof, see the owner's manual for your car.
Vehicle model/model year
XC90 and XC90 Twin Engine of model year 2016 onwards
S90, V90 and V90 Cross Country of model year 2017 onwards
XC60, XC60 Twin Engine and S90 Twin Engine of model year 2018 onwards
XC40, V60, V60 Cross Country, S60 and S60 Twin Engine of model year 2019 onwards