The "field of vision" of the parking cameras with approximate coverage area.
The 360° view function activates all parking cameras, whereupon the four sides of the car are shown simultaneously in the centre display, which helps the driver to observe what is around the car when manoeuvring at slow speeds.
From the 360° view, each camera view can be activated separately:
- Press the screen for the desired “field of vision” of the camera, e.g. on the surface in front of/above the front camera.
A camera symbol on the centre display's car symbol indicates which of the cameras is active.
If the car is also equipped with Park Assist System* then distance to detected obstacles is illustrated with fields in different colours.
The cameras can be activated automatically or manually, see the section "Starting the Park assist camera".
The backwards-facing cameraNOTE: The illustration is schematic - details may vary depending on car model. is fitted above the registration plate.
The backward-facing camera shows a wide area behind the car. For certain models, part of the bumper can be seen as well as the towbar in some cases.
Objects shown in the centre display may appear slightly tilted — this is normal.
The forwards parking cameraNOTE: The illustration is schematic - details may vary depending on car model. is located in the grille.
The front camera can be helpful on an exit road with limited visibility to the sides, e.g. when there are high hedges. It is active at speeds up to 25 km/h (16 mph) - following which, the front camera is switched off.
If the car does not reach 50 km/h (30 mph) and the speed falls below 22 km/h (14 mph) within 1 minute after the forward-facing camera has been extinguished, the camera is reactivated.
The side camerasNOTE: The illustration is schematic - details may vary depending on car model. are positioned in each door mirror.
The side cameras can show what is along each side of the car.