Adding and editing time setting for preconditioning*
The timer for preconditioning can manage up to 8 time settings.
Adding a time setting
Open the climate view in the centre display.
Select the Parking tab.
Press Timers.
Press Add new timer.
Note
It is not possible to add a time setting if there already are 8 settings entered for the timer. Delete a time setting in order to be able to add a new one.
Set a time for one or more days of the week. Activate/deactivate repetition by tapping on Repeat weekly.
Press Set timer.
The time setting is added to the list and is activated.
Warning
Do not use preconditioning1:
- In unventilated spaces indoors. Exhaust gases are emitted if the heater starts.
- In locations with combustible or flammable material nearby. Fuel, gas, long grass, sawdust, etc. may ignite.
- When there is a risk that the heater’s exhaust line may be blocked. For example, deep snow inside the front right-hand wheel housing can obstruct the heater’s ventilation.
Remember that the preconditioning can be started by a timer that has been set for a long time in advance.
Editing a time setting
Open the climate view in the centre display.
Select the Parking tab.
Press the time setting that is to be changed.
A pop-up window is shown.
Edit the time setting in the same way as described in "Adding a time setting" above.