V40

2019

Detachable towbar* - attachment/removal

The attachment and removal of the detachable towbar is performed in the following way:

Attaching

P4-1220-Mounting towbar pos.1

Remove the protective cover by first pressing in the catch and then pulling the cover straight back .

p3007 dragkrok, ditsättning kuldel 2

Ensure that the mechanism is in the unlocked position by turning the key clockwise.

3007 dragkrok, ditsättning kuldel 3

The indicator window must show red.

p3007 dragkrok, ditsättning kuldel 4

Insert the towball section until you hear a click.

p3007 dragkrok, ditsättning kuldel 5

The indicator window must show green.

p3007 dragkrok, ditsättning kuldel 6

Turn the key anticlockwise to locked position. Remove the key from the lock.

p3007 dragkrok, ditsättning kuldel 7

Check that the towball section is secure by pulling it up, down and back.

 Warning

If the towball is not fitted correctly then it must be detached and reattached in accordance with the previous instructions.

 Important

Only grease in the ball for the towball hitch, the remainder of the towbar must be clean and dry.

 Note

When a hitch with a vibration damper is used, the towball must not be lubricated.
p3007 dragkrok, ditsättning kuldel 8

Safety cable.

 Warning

Take care to secure the trailer's safety cable in the intended bracket.

Removal of removable towbar

p3007 dragkrok, borttagning kuldel 1

Insert the key and turn it clockwise to the unlocked position.

p3007 dragkrok, borttagning kuldel 2

Push in the locking wheel and turn it anticlockwise until you hear a click.

p3007 dragkrok, borttagning kuldel 3

Turn the locking wheel down fully, until it comes to a stop. Hold it in this position while pulling the towball rearward and upward.

 Warning

Secure the detachable towbar safely if it is stored in the car, see Detachable towbar - storage.

P4-1220-Detaching towbar pos.4

Push the protective cover until it snaps tight.

Did this help?