Using the drive modes it is possible to quickly have access to the car's numerous functions and settings for different driving needs. The following systems are adapted to obtain the best possible driving characteristics in each respective drive mode:
- Engine/gearbox/all-wheel drive*
Applies to automatic gearbox.
- Shock absorption
- Driver display
- Start/Stop function
- Climate settings
Select the drive mode that best suits the current driving conditions. Remember that not all drive modes can be selected in all situations.
Selecting drive mode
Press the drive mode control DRIVE MODE.
A pop-up menu is opened in the centre display.
Roll the wheel upward or downward until the desired drive mode is highlighted.
Press the drive mode control or tap directly on the touch screen to confirm the selection.
The selected drive mode is indicated in the driver display.
A message is shown when a drive mode is unselectable, for example:
- Cannot be selected because gear is in manual
- Cannot be selected due to low battery
- Cannot be selected due to low temperature
- Cannot be selected due to limitations
- Cannot be selected because speed is too high.
Selectable drive modes
- This is the car's normal mode.
When the car starts, it is in Comfort mode and the Start/Stop function is activated. These settings mean that the car feels comfortable, the steering is light, the shock absorption is soft and body's movement is smooth.
This drive mode is the certification mode for carbon dioxide emissions.
- Adapt the car for more energy-efficient and environmentally-conscious driving with the Eco mode.
The drive mode means, for example, that the Start/Stop function is activated and the output of certain climate settings is reduced.
The driver display has an ECO gauge that facilitates fuel-efficient driving.
More information on this drive mode is found in the section "Drive mode ECO".
- Dynamic mode means that the car has sportier characteristics and faster response to accelerating.
The gear changes become faster and more distinct, and the gearbox prioritises a gear with greater traction.
Steering response is faster and shock absorption is harderApplies to Four-C. which means that the body follows the roadway in order to reduce roll during cornering.
Start/Stop function is deactivated.
- Adapting a drive mode according to individual preferences.
Select a drive mode to start from, and then adjust the settings according to the desired driving characteristics. These settings are saved in an individual driver profile.
An individual drive mode is only available if it is first activated in the centre display.
The figure is schematic, the layout may vary depending on car model or updated software.
Press Settings in the top view.
Press Individual Drive Mode.and select
In Preset, select a drive mode to start from: Eco, Comfort or Dynamic.
Possible adjustments apply to settings for:
- Driver Display
- Steering force
- Powertrain Characteristics
- Brake Characteristics
- Suspension Control
- ECO Climate