Cruise control

Activating and starting Cruise Control

Updated 7/9/2020

Activating and starting Cruise Control

The cruise control function (CCCruise Control) must first be selected and activated in order to be able to regulate the speed.

P5-1507-CC rattknappar-2

NOTE: The illustration is schematic - details may vary depending on car model.

Set cruise control in standby mode

To set cruise control in standby mode:

Press (1) or (3) to browse to the symbol/function (4).

The symbol is shown and the cruise control can then be activated.

Activating/starting cruise control

In order to start the Cruise control from the standby mode, the car's current speed must be 30 km/h (20 mph) or higher. The lowest speed that can be stored is 30 km/h (20 mph).

To start the cruise control:

With the symbol/function displayed, press the steering wheel button (2).

Cruise Control starts and the current speed becomes the stored speed.


Cruise Control cannot be enabled at speeds below 30 km/h (20 mph).

Did this help?