V60 Cross Country

2016 Late

Itinerary and route

Navigation* - map options

Updated 7/23/2018

Settings can be made here for how the map should be shown and what should be shown.

Full screen map

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsShow full-screen map.

Select map size:

  • Box selected - shows map across whole screen.
  • Box unselected - car-related information such as e.g. passenger compartment temperature and media being played back are shown in the bottom and top of the screen.

Map position

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsMap type.

Select how the map should be shown on the screen:

  • North up - the map always shows North at the top of the screen. The car symbol moves in the relevant direction on the screen.
  • Map heading up - the car symbol is in the centre and always points up on the screen. The map image rotates under the car symbol in relation to how the road bends.
  • 3D map basic - the map is viewed diagonally from above with the car symbol in the centre and direction of travel upward on the screen.
  • 3D map enhanced - same as the previous option but with different objects, buildings, etc. added into the map image.

Information along a motorway

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsMotorway information.

Select function:

  • Box selected - when the car is on a motorway the three (3) next exits that have e.g. a rest area or petrol station are shown. The list is sorted with the closest exit at the bottom of the list.
  • Box unselected - function switched off.

Information about current position

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsPosition information.

Select position information:

  • Current road - the screen shows the name of the road/street where the car/cursor is located.
  • Lat/Long - the screen shows the coordinates for the location where the car/cursor is located.
  • None - the screen shows no information for the location where the car/cursor is located.

Compass

There is a compass on the screen's map image that shows the direction in which the front of the car is pointing.

The red tip of the compass needle points north and the white end points south. A text-based compass direction can also be selected as an alternative to the graphic compass.

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsCompass.

Select whether compass direction should be shown with a compass needle or with letters:

  • Graphic - a compass needle indicates the compass direction.
  • Text - the letters N for north, W for west, S for south or E for east indicate compass direction.

The map image's compass direction - north or direction of travel upward on the screen - can also be adjusted, see section "Map mode compass direction" above.

Points of interest (POI) on map

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsPOI symbols.

Marked POI  options are shown on the map.

Marked POI options are shown on the map.

Select which POI symbols should be shown on the map.

  • Default - POI specified with the function Selected is/are shown.
  • Selected - select with the TUNE knob + OK for each POI required on the screen.
  • None - no POI is/are shown.

To avoid making the map image difficult to read, the number of POI options that can be viewed simultaneously on the screen is limited - zooming into an area provides the opportunity to view several POI options.

Map colours

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsMap colours.

Select setting for map colours:

  • Automatic - a light sensor detects whether it is day or night and adapts the screen automatically.
  • Day - the colours and contrast of the screen become clear and sharp.
  • Night - the colours and contrast of the screen are adapted to provide the driver with optimum night vision.

Stored location on map

In the normal view for the navigation source, press OK/MENU and select SettingsMap optionsStored location on map.

All stored positions are shown.


Did this help?