V60 Cross Country

2017 Late

Internet map

Internet map - map options

Updated 7/23/2018

Settings for different map options.

P3/P4-1420-IMAP-menu-Route options-full-screen-map

Full screen map

To show the map in full screen, in the normal view for the source, press OK/MENU and select SettingsMap optionsShow full-screen map. Highlighted option + OK shows the map across the whole screen without other car-related information, such as passenger compartment temperature or active radio transmitter in the lower and upper edge of the screen.

Map mode compass direction

To set compass direction, in the normal view for the source, press OK/MENU and select SettingsMap optionsMap type.

This is where to select how the map should be shown on the screen. Activate the desired option with OK.

  • North up - the map is always shown with North at the top of the screen. The car symbol moves in the current compass direction on the screen.
  • Map heading up - the car symbol is in the centre and is always pointing upwards on the screen. The map image rotates under the car symbol in relation to how the road turns.
  • 3D Heading up - same as Map heading up but 3D map. Display varies depending on zoom.

Information about current position

To set the information about current position, in the normal view for the source, press OK/MENU and select SettingsMap optionsPosition information.

Activate the desired option with OK.

  • Current road - the screen shows the name of the road/street where the car/cursor is located.
  • Lat/Long - the screen shows the coordinates of the location where the car/cursor is located.
  • None - the screen shows no information for the location where the car/cursor is located.

Point of interest (POI) on the map

To set which POI options should be shown on the map, in the normal view for the source, press OK/MENU and select SettingsMap optionsPOI symbols.

This is where to specify which POI options should be shown on the map. Activate the desired option with OK.

  • Default - POI options specified with the function Selected are shown.
  • Selected - select with the TUNE knob + OK for each POI option required on the screen.
  • None - no POI options are shown.

For examples of POI, see Internet map - points of interest (POI) symbols.

Map colours

To set map colours, in the normal view for the source, press OK/MENU and select SettingsMap optionsMap colours.

Activate the desired option with OK.

  • Automatic - a light sensor detects whether it is day or night and adapts the screen automatically.
  • Day - the colours and contrast of the screen become clear and sharp.
  • Night - the colours and contrast of the screen are adapted to provide the driver with optimum night vision.

Traffic information on the map

Highlighted in green, yellow or red on the side of the roads on the map that have traffic information. Green means no disruptions, yellow means slow traffic and red means congestion/traffic jam/accident.

Note

Traffic information is not available in all areas/countries.

The traffic information transmission areas are constantly being expanded.

To show traffic information, in the normal view for the source, press OK/MENU and select SettingsMap optionsTraffic on map.


Did this help?