Stalk switch and knob for headlamp control.
With the knob in position, dipped beam is activated automatically at twilight or when daylight becomes too weak. Dipped beam is also activated automatically if the windscreen wipers or the rear fog lamps are activated.
With the knob in position dipped beam is always switched on when the engine is running or when key position II is active.
Main beam flash
Move the stalk switch gently towards the steering wheel to the position for main beam flash. Main beam comes on until the stalk switch is released.
Main beam can be activated when the knob is in position When dipped beam is switched on. or . Activate/deactivate main beam by moving the stalk switch towards the steering wheel to the end position and then releasing. Alternatively, the main beam can be deactivated by a light press of the stalk switch toward the steering wheel.
When main beam has been activated the symbol illuminates in the combined instrument panel.
If the car has auxiliary lamps, the driver can use the MY CAR menu system to choose whether they should be deactivated or switched on/off simultaneously with the main beamAuxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop., see MY CAR.