Automatic gear selector inhibitor
The automatic gear selector inhibitor has special safety systems.
From park position - P
To select a gear position other than the P position, the brake pedal must be depressed and the ignition position must be II.
From neutral position - N
If the gear selector is in the N position and the car has been stationary for at least 3 seconds (irrespective of whether the engine is running) then the gear selector is locked.
To be able to move the gear selector from the N position to another gear position, the brake pedal must be depressed and the ignition position must be II.
Message in the driver display
If the gear selector is inhibited, a message is shown in the driver display, e.g. Gear lever Press brake pedal to activate gear lever.
The gear selector is not inhibited mechanically.