Record & Send

Record & Send is an in-car app that allows you to record personal voice messages and send them to a selected recipient.
16w17 - Support Site - Record & Send (LOGO)

Starting Record & Send

When the app is started, you can choose between two alternatives: Recipient and Record. Under Recipient you enter the e-mail address to which the recoding shall be sent. The recoding starts when you press the microphone. You speak freely and the app uses the same microphone that is used in the car's handsfree function.

Ending Record & Send

When you are satisfied with the recording you press the microphone again. The recoding is stopped and you can choose between sending the recording or deleting it, if it was not good enough for example.

Opening the voice recording

When the recording has been sent, the recipient receives an e-mail message that can be opened in a normal e-mail program, either on a mobile or in a computer. The recording is included as an attached file in MP3 format.

Open software

Use the LAME open software library to compress your recordings in MP3 format. You can find out more about LAME on their website:

This article is applicable to

    Car model/model year
  • XC90 and XC90 Twin Engine/Recharge Plug-in Hybrid from model year 2016 to 2022.

  • S90, V90 and V90 Cross Country from model year 2017 to 2021.

  • XC60, XC60 Twin Engine/Recharge Plug-in Hybrid, V90 Twin Engine/Recharge Plug-in Hybrid and S90 Twin Engine/Recharge Plug-in Hybrid from model year 2018 to 2021.

  • XC40 from model year 2018 onwards.

  • V60, V60 Twin Engine/Recharge Plug-in Hybrid, V60 Cross Country, S60, S60 Twin Engine/Recharge Plug-in Hybrid from model year 2019 to 2022.

  • XC40 Twin Engine/Recharge Plug-in Hybrid from model year 2020 onwards.

  • The range of models may vary depending on market.

  • Sensus Connect

Did this help?