Changing brake light bulb

1. 1.Press in the panel hatch at the upper edge to detach it.
2. 2.Move the insulation aside to access the brake light bulb.

1. 3.Undo the black bulb holder by turning it anticlockwise and pulling it out.
2. 4.Remove the bulb by pressing it in and turning anticlockwise.
3. 5.Fit a new bulb by pressing it in and turning it clockwise.
4. 6.Attach the bulb holder by turning it clockwise.
5. 7.Move back the insulation and then hook in the panel and press it back into place.

 Important

Never touch the glass part of the bulbs with your fingers. Grease from your fingers is vaporised by the heat, coating the reflector and then causing damage.