Calibrating tyre monitoring*
Inflate the tyres to the desired pressure in accordance with the tyre pressure label on the door pillar on the driver's side.
Open the Car status app in the app view.
Note
Drive the car.
Calibration is performed while the car is driving. Calibration is interrupted temporarily if the engine is switched off, but is resumed automatically when the car is driven again.
When sufficient data has been collected to enable the system to detect low tyre pressure, the tyres in the centre display change colour from grey to green. The system provides no additional confirmation that the calibration is complete.
If calibration fails, a message is shown: Calibration unsuccessful. Please try again..