Linking remote control key to driver profile

It is possible to link your key to a driver profile. The driver profile along with all of its settings will then be automatically selected every time the car is used with that specific remote control key.

The first time the remote control key is used, it is not linked to any specific driver profile. When the car is started, the Guest profile will automatically be activated.

A driver profile can be selected manually without linking it to the key. When the car is unlocked, the last active driver profile is activated. Once the key has been linked to a driver profile, a driver profile does not need to be selected when that specific key is used.

Linking a remote control key to a driver profile

 Note

Connecting a remote control key to a driver profile is only possible when the car is stationary.
First select the profile to be linked to the key, if the profile to be linked is not already active. The active profile can then be linked to the key.
Press Settings in the top view in the centre display.
Press SystemDriver Profiles.
Select the desired profile. The display returns to the home view. The Guest profile cannot be linked to a key.
Drag down the top view again and tap on SettingsSystemDriver ProfilesEdit Profile.

Select Connect key to link the profile with the key. It is not possible to link a driver profile to a different key than the one currently being used in the car. If there are multiple keys in the car, the message More than one key is found, put the key you want to connect on backup reader will be displayed.

P5-1717-HYBRID-Backup start place in tunnel console
Backup reader's location in the tunnel console.
When the message Profile connected to key is shown, the key and the driver profile are linked.
Press OK.
This key is now linked to the driver profile and will remain linked as long as the Connect key box is not unticked.