Adjust the seat and fix it before driving away. Take care when adjusting the seat. Uncontrolled or careless adjustment can lead to trapping injuries.
There must be no objects on the rear seat when the backrest is to be folded down. The seat belts must not be connected either. Otherwise there is a risk of damaging the rear seat upholstery.
The integrated booster cushions* on the outer seats must be lowered before lowering the seat.
The armrest* for the centre seat must be raised before lowering the seat.
If the car has private locking, the tailgate must be closed before lowering the seat.
The front seats may need to be pushed forwards, and/or the backrests adjusted upwards, in order that the rear backrests can be fully folded forward.
Lowering the backrest
Ensure that there are no occupants or objects in the rear seat.
Lower the centre seat's head restraint manually.
Hold the button depressed. The buttons are located in the parcel shelf on the left-hand side of the car.
The seat is released from the lock but remains in the same position. The head restraints are lowered automatically.
Lower the backrest manually to the horizontal position.
To facilitate folding of the rear seat, the car must be stationary and at least one rear door open.
Raising the backrest
Raising the backrest to upright position is carried out manually:
Move the backrest up/down manually.
Slide the backrest until the catch engages.
The head restraint is raised manually.
If necessary, raise the centre seat's head restraint.