Changing wheels

Changing wheels - taking out the spare wheel*

Updated 7/23/2018

The spare wheel* plus jack* and wheel wrench* are stored under the floor in the cargo area.

Lift the rear edge of the luggage compartment floor (or on models with a jointed luggage compartment floor, take hold of the luggage compartment floor handle, lift and move the rear part of the floor forwards).

Lift out the storage compartment* (only models with a jointed cargo area floor).

Lift out the lower floor (models with a jointed luggage compartment floor only).

Undo the attaching screw and lift out the foam block containing the jack and tools.

Take hold of the far end of the spare wheel, then lift. Push the spare wheel forwards slightly and lift it out of the storage compartment.

Remove the wheel wrench, the jack and the towing eye from the foam block.

Note

The jack must be lifted out in order to access the towing eye.


Did this help?