Drive modes

Launch function*

Updated 11/9/2020

Launch function*

Launch can be used when maximum acceleration is required from stationary. The function is available in the following drive modes: Dynamic, Comfort and Individual.

Activate Launch

Make sure the car is stationary and the wheels are pointing straight forward.

Move to gear position D.

Depress the brake pedal fully.

Then fully depress the accelerator pedal.

Release the brake pedal within 2 seconds.

Note

If the Launch function does not work, wait a few minutes and let the drivetrain cool down to working temperature before retrying.

Important

The drivetrain is subject to wear and tear when using Launch and therefore the function is only available a limited number of times.


Did this help?