Charging the high voltage battery

Charging status in the car's driver display

Updated 5/12/2021

Charging status in the car's driver display

Charging status is indicated in the driver display. Both current and set amperage for charging are shown in the driver display when charging with alternating current. Note that both current and set amperage apply per phase from the alternating current power source.

Colour

Status

Specification

Flashing green

The frame of the driver display is shown with a green pulsing light.

Charging continues and an approximate time for when the high voltage battery is estimated to be fully charged is shown.

Green

The frame of the driver display is shown with a fixed green light.

The high voltage battery is fully charged.

Red

The frame of the driver display is shown with a red pulsing light.

A fault has occurred, check the connection of the charging cable to the car's charging input socket and to the 230 V socketThe voltage in the socket may vary depending on market. (alternating current).

Blue

The frame of the driver display is shown with a blue pulsing light.

Scheduled Charging activated.

Yellow

The frame of the driver display is shown with an amber pulsing light.

Charging is waiting to start or paused charging.

Note

If the driver display is not used for a while then it is dimmed. Reactivate the display by means of one of the following:

  • depress the brake pedal
  • open one of the doors
  • press one of the steering wheel buttons.

Did this help?