Fold the folding cargo area floor forwards.
Press the lock spring as indicated by the arrow until it stops. Maintain the pressure.
At the same time, lift the cargo area floor a few millimetres up from the base.
Release the pressure from the lock spring, but continue holding up the cargo area floor.
Carry on holding up the cargo area floor and press the lock spring on the other side as indicated by the arrow.
If the actions in section 2 have been completed correctly, the cargo area floor should now have been released from its side brackets.
The cargo area floor can be placed carefully back onto the lock springs without being locked in position.
The cargo area floor is also secured with hinges at the front.
Volvo recommends leaving the cargo area floor in its front hinges.
Press on the cargo area floor to lock it back into its brackets.