The upper mounting points are primarily intended for use with front-facing child seats.
Always follow the manufacturer's installation instructions when connecting a child seat to the upper mounting points.
The location of the mounting points
Mounting point location for the front seat is indicated by a symbol on the rear of the front seat.
The mounting point for the front seat* is located on the lower part of the rear of the front seat.
Adjust the seat's head restraint in order to facilitate the installation of child restraint systems.
Mounting point locations for the rear seat are indicated by symbols on the rear of the backrest.
The mounting points for the rear seat are located on the rear of the rear seat's outer seats.
The child seat's upper straps must be routed through the hole in the head restraint leg before they are tensioned at the mounting point. If this is not possible, follow the recommendations from the child seat manufacturer.
Fold the head restraints in order to facilitate fitting this type of child seat in cars with folding head restraints on the outer seats, raise the head restraint after fitting.
The head restraint must always be raised when the child restraint system is used.
The parcel shelf must be removed before child restraint systems can be installed in the mounting points.