Charging status in the charging cable's control unit

The indicator on the charging cable's control unit shows the status of ongoing charging as well as status after completed charging.
P5P6-2017-Control module hybrid cable
Control unit LED1 lamp.
  1. P5-Icon red circle 1LED lamp
LEDStatusSpecificationRecommended action
ExtinguishedCharging is not possible.No power supply to charging cable.
  1. Unplug the charging cable from the socket.
  2. Plug the charging cable into the socket again or use another socket.
  3. If the problem persists – contact Volvo Support.
White lightCharging possible.The charging cable is ready to be plugged into the car.
If the LED lamp is white but charging is not possible:
  1. Unplug the charging cable from the charging input socket.
  2. Plug the charging cable into the charging input socket again.
  3. If the indicator does not flash white within approx. 10 seconds – first unplug the charging cable from the charging input socket and then from the power socket. Plug the charging cable into the charging input socket and the socket again.
  4. If the problem persists – contact Volvo Support.
Flashes whiteCharging in progress.

The car's electronics have started charging

Charging in progress.

Wait until the batteries are fully charged.
Illuminates in redCharging is not possible.Temporary fault.
  1. Unplug the charging cable from the charging input socket.
  2. Wait for a short time.
  3. Plug the charging cable into the charging input socket again.
  4. If the problem persists – contact your Volvo dealer.
Flashes redCharging is not possible.Critical fault.First remove the charging cable from the charging input socket and then from the power outlet. If the problem persists – contact your Volvo dealer.
  1. 1 LED (Light Emitting Diode)