Explore your manual
XC60 Recharge Plug-in Hybrid
2021 Early
Specifications
Specifications for fluids and lubricants
7 Results
Filling washer fluid
Washer fluid is used for cleaning the headlamps as well as the windscreen and rear window. Washer fluid with antifreeze must be used when the temperature is under the freezing point.
Air conditioning — specifications
The car's climate control system uses a freon-free refrigerant either R1234yf or R134a depending on market. Information about which refrigerant the car's climate control system uses is printed on a decal located on the inside of the bonnet.
Brake fluid – specifications
Brake fluid is the medium in a hydraulic brake system that is used to transfer pressure from e.g. a brake pedal via a master brake cylinder, which in turn acts on the brake callipers.
Transmission fluid – specifications
Under normal driving conditions, the transmission fluid does not need to be changed during the service life of the gearbox. However, it may be necessary in adverse driving conditions.
Fuel tank - volume
The fuel tank's filling capacity can be read in the table below.
Adverse driving conditions for engine oil
Adverse driving conditions can lead to abnormally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.
Engine oil — specifications
Engine oil grade and volume for each respective engine alternative can be read in the table.