Integrated child seat

Folding up the seat cushion in the integrated child seat*

Updated 1/26/2021

Folding up the seat cushion in the integrated child seat*

The seat cushion should always be folded up when the integrated child seat is in use.

The seat cushion can be folded up in two positions. The position that should be used depends on the weight of the child.

Lower position

Upper position

Weight

22-36 kg (50-80 lbs)

15-25 kg (33-55 lbs)

Lower position:

P5-1617-S90/V90–Safety–Integrated booster cushion raise lower step 1

Pull the handle forwards and upwards to release the seat cushion.

P5-1617-S90/V90–Safety–Integrated booster cushion raise lower step 2

Press the seat cushion backwards to lock.

Upper position, start from the lower position:

P5-1617-S90/V90–Safety–Integrated booster cushion raise upper step 1

Press the button to release the seat cushion.

P5-1617-S90/V90–Safety–Integrated booster cushion raise upper step 2

Lift the seat cushion up at the front edge and press it back against the backrest to lock.

Warning

If the instructions for the integrated child seat are not followed then the child could sustain serious injury in the event of an accident.

Note

It is not possible to adjust the seat cushion from the upper position to the lower position. From the upper position, the seat cushion must first be fully lowered into the rear seat, and then folded up to the lower position.


Did this help?