How to activate/deactivate service position
When the car is stationary and the windscreen wipers are not switched on, you can activate/deactivate service position via the function view in the following way:
Activate/deactivate service position by tapping on the Wiper Service Position button. The light indicator in the button illuminates when service position is activated and the wipers are then set in service position. The light indicator extinguishes when you deactivate service position.
Wiper blades in service position. The illustration shows the S90.
The wiper blades also leave service position if:
- Windscreen wiping is activated
- Windscreen washing is activated
- The rain sensor is activated
- The car is driven away
Make sure that the wiper blades are not frozen down before they are set in service position.
If the wiper arms in service position have been folded up from the windscreen, they must be folded back down onto the windscreen before the activation of wiping, washing or the rain sensor, as well as before driving. This is to avoid scraping the paint on the bonnet.
Car model/model year
XC90 and XC90 Twin Engine of model year 2016 onwards
S90, V90 and V90 Cross Country of model year 2017 onwards
XC40, XC60, XC60 Twin Engine, V90 Twin Engine and S90 Twin Engine of model year 2018 onwards
V60, V60 Twin Engine and V60 Cross Country of model year 2019 onwards
S60 and S60 Twin Engine of model year 2020 onwards
The range of models may vary depending on market.