Trip computer

Trip computer - trip statistics*

עודכן 7/23/2018

Trip statistics from the trip computer can be shown in the centre console's screen and provide a graphic overview of fuel and electricity consumption.


Open the menu system MY CAR and select Trip statistics in order to see the bar chart.

P3-15w17-Trip statistics S60L hybrid

Trip statistics

The figure is schematic - layout may vary depending on car model or updated software.

Fuel and electricity consumption are shown in separate graphs. Electricity consumption is "net" consumption, i.e. energy consumed minus regenerated energy created during braking.

Each bar symbolises 1 km or 10 km driven distance, depending on the scale selected - the bar at the far right shows the value for the current kilometre or 10 km.

Using the TUNE control, the scale for the bars can be changed between 1 km and 10 km - the cursor on the far right changes position between up and down in relation to the scale selected.


Different settings can be made for trip statistics in the menu system MY CAR - Trip statistics.

  • Reset when vehicle has been off for minimum 4h - highlight the box by selecting ENTER and go back out of the menu by selecting EXIT. With this option selected, all statistics are deleted automatically after finishing driving and the car has been stationary for more than 4 hours. Trip statistics start again from zero the next time the engine is started.
  • Start new trip - ENTER is used to delete all previous statistics, go back out of the menu by selecting EXIT. If a new driving cycle shall be started before 4 hours have elapsed then the current period must first be deleted manually with this option.

See also information on Eco guide.

האם זה עזר?