Memory function for front seat

Storing a position for seat and door mirrors

Updated 11/9/2020

Storing a position for seat and door mirrors

You can store the position for power* seat and door mirrors in the memory buttons.

Store two different positions for the power seat* and the door mirrors using the memory buttons. The buttons are located on the inside of one of the front doors or both*.

P6-CMA-seat position memory buttons
Button M for storing settings.
Memory button.
Memory button.

Storing a position

Adjust seat and door mirrors to the desired position.

Press and hold the M button depressed. The light indicator in the button illuminates.

Within three seconds, press and hold the 1 or 2 button.

When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.

If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.

The seat or the door mirrors must be readjusted before a new memory can be set.

Did this help?